Geekvape Z Series Replacement Coils
Geekvape Z Series Replacement Coils - Z0.2ohm is backordered and will ship as soon as it is back in stock.
Get reliable DTL performance with Geekvape Z coils, designed for compatible Geekvape sub-ohm tanks and vape kits. Also known as Geekvape Zeus coils, these push-fit replacement coils make changing your coil quick and straightforward, without the need to screw the coil into the tank base.
The Geekvape Z Series coils are available in three levels of wattage (0.15Ω, 0.2Ω and 0.4Ω) and all feature the same Kanthal mesh for even heating and consistent vapour production. They are supplied in packs of 5 coils, which is useful for frequent DTL vaping.
The Geek Vape Z coils range is built for high-power vaping, with XM Boost versions designed to offer improved coil longevity compared with the original Z Series coils. Choose your resistance according to your preferred wattage and vaping style.
| Coil | Wattage | Vaping Style | Recommended E-Liquid |
|---|---|---|---|
| 0.15Ω XM | 70–85W | DTL | High VG / 70/30 |
| 0.2Ω XM | 70–80W | DTL | High VG / 70/30 |
| 0.4Ω XM | 50–60W | DTL | High VG / 70/30 |
The 0.15Ω XM operates at its maximum power level and delivers a more warmer DTL feel, the 0.2Ω XM is a comparable high-wattage setup. The 0.4Ω XM is the lower wattage of the two, and is recommended for use when less power is desired for strong direct-to-lung vaping.
Thanks to their push-fit design, Geekvape Zeus coils are easy to change. Pull the old coil from the tank base and push the replacement into position. There is no threading or screwing required.
Make sure the metal tabs on the coil align correctly with the corresponding cut-outs in the tank base before reassembling your tank. Always prime a new coil with e-liquid and allow 3–5 minutes for the cotton to saturate before vaping.
These Geekvape Z Series coils are designed for compatible sub-ohm tanks and higher-power DTL vaping. They are made with Kanthal mesh which ensures even heating of e-liquid for consistent vapour and flavour at recommended wattage.
Z coils work best with 70/30 or other higher VG e-Liquids. They are designed for higher-power mesh e-liquids, NOT for thinner e-liquids such as 50/50 freebase or nic salt e-liquid.
The Geekvape Z coils are compatible with a wide selection of Geekvape kits and Z Sub-Ohm tanks, including:
Geekvape Z Max Tank: Uses M Series coils rather than Z Series coils.
Geekvape Z Nano, Z Nano 2 and Z Nano MTL: These tanks use B Series coils.
If you're searching for Zeus coils or Zeus tank coils, the Z Series is the replacement platform associated with Geekvape's former Zeus naming.
The Z XM Boost coils are an updated version of the original Z Series coils. They retain the same push-fit installation and compatible tank platform while offering improved longevity according to the supplied product specifications.
For vapers replacing older Z coils, the XM Boost versions provide a straightforward replacement option without changing the compatible tank or kit.
| Specification | Details |
|---|---|
| Coil Type | Z XM Boost |
| Resistances | 0.15Ω, 0.2Ω, 0.4Ω |
| Material | Kanthal Mesh |
| Wattage | 50–85W, depending on resistance |
| Installation | Push-Fit |
| Vaping Style | DTL |
| E-Liquid | High VG / 70/30 / Shortfills |
| Pack Size | 5 Coils |
Geekvape Z Series Replacement Coils are available for £10.99 per pack of 5 at Vape Universe.
Looking for more from Geekvape? Explore our range of other Geekvape products to find the right setup for your vaping style with free UK delivery.
For adult smokers and vapers only. Nicotine is addictive.
Geekvape Z coils are push-fit replacement coils for compatible Geekvape sub-ohm tanks and kits. They use a mesh coil design for DTL vaping and are available in different resistances.
Yes. Geekvape Zeus coils is an older name commonly used when searching for the Z coil platform. The existing coils are typically known as the Geekvape Z Series coils.
XM Boost range offers 0.15Ω, 0.2Ω and 0.4Ω variants, recommended wattage is 70–85W for 0.15Ω, 70–80W for 0.2Ω and 50–60W for 0.4Ω.
0.15Ω, 0.2Ω and 0.4Ω are designed for direct-to-lung (DTL) vaping.
Geekvape Z Series coils work best with high-VG e-liquid, but do not work with 50/50 freebase or nic salts e-liquid.
The XM Boost versions will generally use between 50 to 60ml of e-liquid per coil, coil life will vary based on the combination of wattage, e-liquid, frequency of usage, and maintenance.
The Geekvape Zeus/Z coils are push fit. Carefully take the old coil out of the base of the tank and carefully position the new coil and press it firmly in place. There is no need for screwing or threading.
Yes. Fill the tank with a few drops (3–5) of e-liquid onto the exposed cotton areas of your coil, fill your tank and wait around 3–5 minutes to let the coil soak up before you start vaping again. Start at the lower end of the recommended wattage range.
Yes. Z Series replacement coils use a push-fit installation system, allowing the coil to be pulled out and replaced without threading.
No. The Geekvape Z Max Tank uses M Series coils, so Z Series coils are not compatible.
No. The Z Nano 2 uses B Series coils, not Geekvape Z coils.
Packs include 5 Geekvape Z replacement coils with the desired resistance.
Yes, but it is important to note that not all of your Geekvape sub-ohm tank or kit will be compatible with the Z Series platform. Please read the manufacturer's coil compatibility before ordering.
The main differences are resistance and recommended wattage. The 0.15Ω runs at the highest power range, the 0.2Ω offers a similar high-power DTL setup, while the 0.4Ω works at lower wattage and can place less demand on the battery.
1 to 2 Working Days | £2.99
Enjoy tracked delivery with same day despatch available Monday to Friday for orders made before 4pm (excluding Bank Holidays). Our delivery service ensures your items are delivered from Monday to Friday.
1 Working Day | £4.99
DPD tracked delivery service with a convenient 1-hour time window. We offer same-day despatch for orders placed before 3pm from Monday to Friday, excluding Bank Holidays. Please note that orders made on Friday will be delivered the following Monday. Not available for deliveries to the Scottish Highlands or islands.
Deliveries to remote and non-mainland UK areas, including parts of Scotland such as Inverness and postcodes AB, BT, JE, IM, IV, HS, KW, PA, PH, ZE, PO30–PO41 and TR21–TR25, may take longer and may incur higher postage charges. Due to Royal Mail battery restrictions, no more than 2 batteries or battery-powered vape devices should be sent in a single parcel. If ordering more than 2, please contact our customer support team, as separate parcels may be required to prevent delays, parcels being held, returned or destroyed by the courier.
Note: If a parcel is delayed, held, returned to sender or destroyed by Royal Mail, DPD or another local delivery service due to their restrictions or regulations, the sender will not be responsible. Please check with your local delivery service before ordering battery-powered products.
Choosing between the OXVA Xlim Pro 4 and Xlim Pro 3 can be difficult because both devices share several important features. They offer adjustable power up to 30W, refillable pods, adjustable...
Continue Reading
The UK vaping industry is preparing for several important changes under the Tobacco and Vapes Act 2026. The legislation introduces new rules covering the sale of vaping products, age restrictions,...
Continue Reading
Looking at the Hayati Pro Max Plus vape kits and trying to decide between the Pro Max Plus 4K and Pro Max Plus 6K? Both are rechargeable prefilled pod kits from the...
Continue Reading
Looking at the latest Vaporesso vape kits and not sure which one fits your vaping style? The Vaporesso range has grown well beyond the standard XROS pod, with compact beginner-friendly devices,...
Continue Reading
UK’s new Vaping Products Duty (VPD) starts on 1 October 2026, changing the way vape products are taxed and potentially increasing the price customers pay for e-liquid. That does not...
Continue Reading
Looking at the latest OXVA Xlim pod kits and not sure whether the Xlim 4 or Xlim 3 Ultra is right for you? This guide compares both devices across their...
Continue Reading
Get reliable DTL performance with Geekvape Z coils, designed for compatible Geekvape sub-ohm tanks and vape kits. Also known as Geekvape Zeus coils, these push-fit replacement coils make changing your coil quick and straightforward, without the need to screw the coil into the tank base.
The Geekvape Z Series coils are available in three levels of wattage (0.15Ω, 0.2Ω and 0.4Ω) and all feature the same Kanthal mesh for even heating and consistent vapour production. They are supplied in packs of 5 coils, which is useful for frequent DTL vaping.
The Geek Vape Z coils range is built for high-power vaping, with XM Boost versions designed to offer improved coil longevity compared with the original Z Series coils. Choose your resistance according to your preferred wattage and vaping style.
| Coil | Wattage | Vaping Style | Recommended E-Liquid |
|---|---|---|---|
| 0.15Ω XM | 70–85W | DTL | High VG / 70/30 |
| 0.2Ω XM | 70–80W | DTL | High VG / 70/30 |
| 0.4Ω XM | 50–60W | DTL | High VG / 70/30 |
The 0.15Ω XM operates at its maximum power level and delivers a more warmer DTL feel, the 0.2Ω XM is a comparable high-wattage setup. The 0.4Ω XM is the lower wattage of the two, and is recommended for use when less power is desired for strong direct-to-lung vaping.
Thanks to their push-fit design, Geekvape Zeus coils are easy to change. Pull the old coil from the tank base and push the replacement into position. There is no threading or screwing required.
Make sure the metal tabs on the coil align correctly with the corresponding cut-outs in the tank base before reassembling your tank. Always prime a new coil with e-liquid and allow 3–5 minutes for the cotton to saturate before vaping.
These Geekvape Z Series coils are designed for compatible sub-ohm tanks and higher-power DTL vaping. They are made with Kanthal mesh which ensures even heating of e-liquid for consistent vapour and flavour at recommended wattage.
Z coils work best with 70/30 or other higher VG e-Liquids. They are designed for higher-power mesh e-liquids, NOT for thinner e-liquids such as 50/50 freebase or nic salt e-liquid.
The Geekvape Z coils are compatible with a wide selection of Geekvape kits and Z Sub-Ohm tanks, including:
Geekvape Z Max Tank: Uses M Series coils rather than Z Series coils.
Geekvape Z Nano, Z Nano 2 and Z Nano MTL: These tanks use B Series coils.
If you're searching for Zeus coils or Zeus tank coils, the Z Series is the replacement platform associated with Geekvape's former Zeus naming.
The Z XM Boost coils are an updated version of the original Z Series coils. They retain the same push-fit installation and compatible tank platform while offering improved longevity according to the supplied product specifications.
For vapers replacing older Z coils, the XM Boost versions provide a straightforward replacement option without changing the compatible tank or kit.
| Specification | Details |
|---|---|
| Coil Type | Z XM Boost |
| Resistances | 0.15Ω, 0.2Ω, 0.4Ω |
| Material | Kanthal Mesh |
| Wattage | 50–85W, depending on resistance |
| Installation | Push-Fit |
| Vaping Style | DTL |
| E-Liquid | High VG / 70/30 / Shortfills |
| Pack Size | 5 Coils |
Geekvape Z Series Replacement Coils are available for £10.99 per pack of 5 at Vape Universe.
Looking for more from Geekvape? Explore our range of other Geekvape products to find the right setup for your vaping style with free UK delivery.
For adult smokers and vapers only. Nicotine is addictive.
Geekvape Z coils are push-fit replacement coils for compatible Geekvape sub-ohm tanks and kits. They use a mesh coil design for DTL vaping and are available in different resistances.
Yes. Geekvape Zeus coils is an older name commonly used when searching for the Z coil platform. The existing coils are typically known as the Geekvape Z Series coils.
XM Boost range offers 0.15Ω, 0.2Ω and 0.4Ω variants, recommended wattage is 70–85W for 0.15Ω, 70–80W for 0.2Ω and 50–60W for 0.4Ω.
0.15Ω, 0.2Ω and 0.4Ω are designed for direct-to-lung (DTL) vaping.
Geekvape Z Series coils work best with high-VG e-liquid, but do not work with 50/50 freebase or nic salts e-liquid.
The XM Boost versions will generally use between 50 to 60ml of e-liquid per coil, coil life will vary based on the combination of wattage, e-liquid, frequency of usage, and maintenance.
The Geekvape Zeus/Z coils are push fit. Carefully take the old coil out of the base of the tank and carefully position the new coil and press it firmly in place. There is no need for screwing or threading.
Yes. Fill the tank with a few drops (3–5) of e-liquid onto the exposed cotton areas of your coil, fill your tank and wait around 3–5 minutes to let the coil soak up before you start vaping again. Start at the lower end of the recommended wattage range.
Yes. Z Series replacement coils use a push-fit installation system, allowing the coil to be pulled out and replaced without threading.
No. The Geekvape Z Max Tank uses M Series coils, so Z Series coils are not compatible.
No. The Z Nano 2 uses B Series coils, not Geekvape Z coils.
Packs include 5 Geekvape Z replacement coils with the desired resistance.
Yes, but it is important to note that not all of your Geekvape sub-ohm tank or kit will be compatible with the Z Series platform. Please read the manufacturer's coil compatibility before ordering.
The main differences are resistance and recommended wattage. The 0.15Ω runs at the highest power range, the 0.2Ω offers a similar high-power DTL setup, while the 0.4Ω works at lower wattage and can place less demand on the battery.
Coil Type
